Case
Our Customers
Contact Us
Tel:
+86-757-8633-0278
Email:doyen@doyenchina.com
Fax:+86-757-86287390
Address:Room 201, Building No. 24, Yicui Rose Garden, No. 2, Jihua 7 Road, Chancheng District, Foshan City, Guangdong Province, China 528000.
After running for a period of time, the flushing water needle of the belt filter press is blocked. When the flushing water needle is clogged, it is the main reason that the belt filter press produces poor results and runs mud. Solve the blockage of flushing water needle: (1) Remo...
May-09-2021
There may be multiple stamping processes in the stamping process of the belt filter press. This article briefly introduces several stamping processes to understand: The stamping process of the belt filter press refers to the stamping process of partially squeezing the material to form di...
May-09-2021
Several maintenance points of belt filter press: Enough flushing time of the belt filter press should be ensured every day. When the belt filter press is shut down, the inside (filter) and the whole body of the machine should be rinsed to ensure cleanliness and reduce sludge corrosion. Oth...
May-06-2021
Improvement of the pneumatic device of the belt filter press and the rubber roller system of the filter press 1. Pneumatic device The filter belt of the old-fashioned belt filter press uses double cylinders to correct deviation, and only the lower filter has a filter belt limit switch to ...
May-06-2021
How to get out of the sales dilemma of belt filter press: Domestic pollution control equipment includes belt filter presses and other sludge treatment equipment. Where are the major problems and what are the difficulties we need to face now, and what is the investment of small and medium p...
May-04-2021
The operation of the filter belt must be kept as symmetrical as possible in the middle of the rollers. This machine adopts sensitive pneumatic component sensors to detect and control. When the filter belt deflects laterally, the correction cylinder drives one end of the correction rolle...
May-04-2021
When the belt filter press treats sludge and sewage, the first thing that cannot be separated from the sludge is the separation of sludge and water. In order to achieve good results in the separation of sludge and water, it is necessary to use reagents such as polyacrylamide, because poly...
May-02-2021
Sludge is an inevitable product of sewage treatment in sewage treatment plants and sewage stations. After the sludge that has not been properly treated and disposed of enters the environment, it directly brings secondary pollution to the water body and the atmosphere, and poses a serious th...
May-02-2021
The operating cost of belt filter press is lower than that of the same type of equipment on the market. The main details are as follows: 1. High degree of automation, saving labor costs. The belt filter press has a high degree of automation, a short dehydration cycle, and no stickine...
Apr-30-2021
Analyze the selection guide of belt filter press: The temperature and viscosity, physical and chemical characteristics of the material in the filtering state, the processing capacity per unit time, the moisture content of the filter cake, the solid content in the filtrate, the degree of was...
Apr-30-2021
With the rapid improvement of the industrial development level, filter press equipment is one of the common equipment in contemporary industry. Before we use the filter press, we must carry out a series of inspections and adjustments to it so that it can reach the ideal working condition....
Apr-28-2021
How to solve the problem of thin mud cake pressed by belt filter press and high moisture content. The pressed mud cake is thin and the water content is high, which can be attributed to the belt filter press not being able to press the mud, which can be described as the following: Mud runs a...
Apr-28-2021