10 years focus on the development and production of belt filter press and wastewater treatment

banner

Current page:

Home

/

Case

/

The filter mechanism in the belt filter press

Case

Contact Us

Tel:

+86-757-8633-0278

Email:doyen@doyenchina.com

Fax:+86-757-86287390

Address:Room 201, Building No. 24, Yicui Rose Garden, No. 2, Jihua 7 Road, Chancheng District, Foshan City, Guangdong Province, China 528000.

The filter mechanism in the belt filter press

      Filtration mode: the way of filtrate outflow is clear flow filtration and undercurrent filtration.

  1. Open-flow filtration: A water nozzle is installed on the lower outlet hole of each filter plate, and the filtrate flows directly out of the water nozzle.
  2. Undercurrent filtration: a liquid outlet hole is arranged below each filter plate, and the liquid outlet hole of several filter plates is connected into a liquid outlet channel, which is discharged from the pipe connected with the liquid outlet hole under the thrust plate.

(2) Washing method: when filter cake needs to be washed, sometimes one-way flow washing and two-way washing, undercurrent one-way washing and two-way washing.

A,Straight flow one-way washing is that the lotion enters from the lotion hole of the thrust plate in turn, passes through the filter cloth and then through the filter cake, and flows out of the filter plate without holes. At this time, the outlet water nozzle of the perforated plate is closed.

The outlet water nozzle of the non-porous plate is in the open state.

B, two-way flow washing is, the wash liquid from both sides of the top of the thrust plate into the hole has been washed twice, that is, the wash liquid first from one side and then from the other side of the wash, the outlet and the inlet of the wash liquid is diagonal

Direction, so also called two-way cross washing.

C, the undercurrent unidirectional flow is polyester, the lotion from the thrust plate into the hole into the perforated plate, through the filter cloth and then through the filter cake, from the hole filter plate.

D, undercurrent two-way washing is the wash liquid from the two sides of the two wash holes above the stop plate has been washed twice, that is, washing from one side first, then from the other side of the wash, the outlet of the wash liquid is diagonal

To, so it is also called undercurrent two-way cross washing.

(3) Press cloth: Press cloth is a main filter medium. The selection and use of press cloth plays a decisive role in the filtration effect. When choosing, it should be selected according to the pH value of the filter material, solid particle size and other factors.

Appropriate press cloth material and aperture to ensure low filtration cost and high filtration efficiency, use, to ensure that the press cloth is flat, no discount, smooth aperture.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.

 

Jan-27-2021

admin