15 years focus on the development and production of slurry filters and wastewater treatment

banner

Current page:

Home

/

News

/

[mine sludge dehydrator] is applied to dry discharge of tailings! Dry drainage dewatering process of tailings.

News

Contact Us

Tel:

+86-757-8633-0278

Email:doyen@doyenchina.com

Fax:+86-757-86287390

Address:Room 201, Building No. 24, Yicui Rose Garden, No. 2, Jihua 7 Road, Chancheng District, Foshan City, Guangdong Province, China 528000.

[mine sludge dehydrator] is applied to dry discharge of tailings! Dry drainage dewatering process of tailings.

Process of tailings dehydration and dry drainage equipment:

Process: tailings are first concentrated by desliming and then filtered into filter bowl and transported to tailings pond for storage.

     Thickener + hydrocyclone + mine sludge dehydrator (split belt filter press), this combination is suitable for medium and coarse-grained tailings, but the production and operation power consumption is low, the cost is small, the investment is small, and the product water content is 15% – 18%.

     This combination can be applied to dehydration requirements of almost all minerals within 80%. The operation cost is 1 / 2 of ceramic filter, belt filter and box filter.

Application scope of mine sludge dehydrator tailings dry drainage

The mine sludge dehydrator tailings dry drainage process has good benefits for the following applications:

  1. After tailings treatment, brick can be made to produce aerated brick and small solid brick;
  2. With the extension of the service life of the original slurry discharge to the tailings pond, the dry beach of the tailings pond is insufficient, which does not meet the safety requirements and cannot find a suitable place or extends the service life of the tailings pond (the storage capacity can be increased by more than 1 / 4-1 / 3);
  3. The capacity of the closed tailings pond can be increased by 20-30% by reusing the dry discharged tailings pond;
  4. The tailings pond with original slurry discharge can be dammed by dry discharge, which is safe and reliable.
  5. Use dry slag discharge, fill pit and make farmland;
  6. The tailings pond in the mining area is located in an environment with serious water leakage.

   

      Doyen china have different cases of mud pressing in mining industry in many countries. Welcome to visit our manufacturing workshop and work out a better sludge dewatering plan suitable for your company’s mining industry.Welcome to joyce@doyenchina.com or visit https://www.doyenchina.com.

May-09-2020

admin

Technical Support: Magic Lamp