Can the filter press be placed after the machine has stopped?

         Most of the working environment of filter press is high temperature in humid and humid environment. These conditions will have some adverse effects on the equipment. Let us take a closer look at the damage to the filter press control box.
Damp moisture is harmful to filter press equipment, first of all, the control box of the equipment. What is the hazard of the control box? Control components, sensors with controllers, etc., when attacked by water, this will cause the sensor’s sensitivity to be insufficiently sensitive, or the controller will not be able to install the pre-equipment program at all, causing the equipment to be completely paralyzed, or even the circuit may be disconnected, resulting in Charging other metal devices can cause casualties. Therefore, the big hazard of water to the equipment is the control box that collects a large number of lines.

In addition to the effect of water vapor on the control box, the editor also reminds everyone that after the equipment has been used for a long time, attention should be paid to the problem of line aging. This problem also has great security risks. If you don’t pay attention, then you will encounter humidity problems, and the consequences may be serious.
Can the filter press be placed after the machine is stopped? In fact, it is not so simple. After turning off the machine, complete the following follow-up operations to ensure the normal use of the equipment.
1. When the filter press equipment is stopped, the basic job is to make sure that there is no filtrate in the equipment, which means that the filter cannot be used in the equipment because the static liquid flows slowly in the equipment. The air is dry and precipitated. What should I do afterwards? After shutting down, the filter press will also form hard solids, which will not only block important parts of the equipment, but also may cause the filter press to not work normally when it is restarted next time. If it is severe, the filter press will burst. Therefore, clean the filtrate used in the equipment to prevent them from drying out or undergoing chemical changes in the equipment.

2. Once the filter cloth of the filter press is used, keep the filter cloth moist. Now, once the filter cloth is used together with the filter press, the strong pressure of the filter and equipment will make the filter cloth thinner. This filter cloth can no longer withstand the dry test. Because the filter cloth is too dry, the filter cloth fibers will shrink, so the filter cloth will seriously change the quality of the trapped solid particles, seriously affect the working quality of the filter press, and make the filter cloth more likely to be damaged. Therefore, the filter cloth should be protected after shutdown.
3. Otherwise it will cause oil deterioration and corruption, so the hydraulic station should be sealed and protected after shutdown.
Shutdown work should not be hasty, which directly affects the service life of the equipment and the efficiency of the next step, and subsequent operations cannot be ignored.

            Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com