Maintenance of belt filter press

      After-sales service personnel of belt filter press give customers maintenance management suggestions.

The leader checks the dewatering effect of the belt filter every hour, and finds that the filtrate is turbid and the sludge filtration declines. The cause should be analyzed in time and corresponding measures should be taken.

Second, observe the effect of sludge pressure filtration. If the solid content of the sludge cake decreases, the situation should be analyzed and resolved immediately.

Third, frequently observe the operating status of the belt filter press filter, and take corrective measures to ensure normal operation according to the direction of deviation.

Fourth, ensure sufficient flushing time before the belt filter press is turned off every day. When the belt filter press is used, the inside and the whole body of the machine should be rinsed thoroughly to avoid the difficulty of washing after the mud is dry.

Fifth, in accordance with the requirements of the dewatering machine, always do a good job of observation and inspection and maintenance of the machine, and always pay attention to checking the easy wear of the dewatering machine, and replace it if necessary.

Sixth, discover in time the damage to the filter belt caused by the sand particles in the mud in the filter press, and repair it in time if the damage is serious.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.