Precautions for the normal operation of sludge dewatering machine

       (1) The flushing water must have sufficient pressure and flow. Because the sludge dewatering machine first relies on gravity to naturally remove free water, and then relies on mechanical extrusion to dewater, whether the filter belt is cleaned or not directly affects the working effect of the filter press;

(2) Adjust the flocculation state. The operator must master the amount of material and the proportion of the agent to achieve a better flocculation state, which is related to the processing volume, product moisture and filtrate quality;

(3) The previous shift should create good working conditions for the next shift, including the configuration of medicaments and the mixing of materials. This is due to the large capacity of the flocculant dissolving system and cannot be used immediately. The conditions created by the first class are closely related;

(4) After each shift, the filter belt and the drip tray should be rinsed clean;

(5) The maintenance personnel should regularly maintain the equipment, and fill the main bearing and lithium grease every 20-30d, and the oil mist in the dual body should be regularly lubricated;

(6) Pay attention to analyze the reasons for the deviation of the filter belt.

Judging from the use of the plant, there are mainly the following points:

①The automatic correction system fails;

②Uneven cloth;

③The surface of the drum is sticky and the filter belt is deformed.

      Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.