The reason for the low operating cost of belt filter press, free professional knowledge

        The operating cost of belt filter press is lower than that of the same type of equipment on the market. The main details are as follows:
　　 1. High degree of automation, saving labor costs. The belt filter press has a high degree of automation, a short dehydration cycle, and no stickiness at the bottom of the sludge dehydration. Workers are not required to manually discharge the material, which saves energy and labor costs in the sludge dehydration process.
　　 2. The quality of the equipment is guaranteed, avoiding the cost of repairs. The belt filter press is integrally welded with a national standard square tube. The surface is high-pressure sandblasted to remove rust, oxide scale, and sprayed with four layers of fluorocarbon paint. It has an acid-base corrosion resistance for more than ten years. It has high strength and good water permeability. The filter screen that is not easy to be blocked, easy to clean, and easy to disassemble ensures the overall service life of the equipment. On this basis, the correct operation of the equipment in accordance with the operating methods guided by the technicians of Guoyi Heavy Industry will greatly reduce the probability of failure and avoid damage to the equipment.

　　 3. The cost of sludge flocculation and conditioning chemicals is low. Ordinary sludge dewatering equipment requires a relatively large amount of conditioning agents because of its low pressing pressure. The sludge needs to be fully modified to reduce the difficulty of dewatering before it can achieve the desired dewatering effect. However, because of the high pressure of the hydraulic system design of the belt filter press, only a small amount of conditioning agents need to be added in the sludge modification step to achieve satisfactory results.
　　Four. Low dehydration, reducing the volume of sludge and saving transportation costs. For sludge with a moisture content of about 90%, the moisture content of the sludge can be reduced to less than 50% after the dehydration and filtration treatment of the belt filter press, forming an easy-to-transport sludge cake, so that the volume can be obtained. Therefore, the transportation cost of sludge cake outbound transportation is correspondingly saved a lot.

　　 For normal operating sludge treatment projects, in addition to the initial purchase of sludge treatment equipment and capital investment in infrastructure, in fact, the later sludge treatment cost is the main factor that affects the long-term development of the sludge treatment project. For users, when choosing a belt filter press, in addition to comparing the price of the equipment, factors such as later operating costs and environmental protection should also be issues that we need to consider!

         Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.