Matters needing attention in the daily use of filter press

        As a mature solid-liquid separation equipment filtration product, the plate and frame filter press has a long history in industrial production. Good separation effect and wide adaptability. Especially for the separation of viscous and fine materials, it has the best advantages. An essential product on the market.

　　The working process of the plate and frame filter press. After the filtrate enters the water inlet pipe, the filtrate is pumped into the two water distribution pipes under high pressure. These two water distribution pipes are the same as the plate and frame filter press. Connect the two water inlet flanges on the top of the machine so that the filtered liquid can enter the two distribution pipes above the plate and the filter plate of the filter press, and when the distribution pipes are squeezed and crimped piece by piece by the filter plate, each filter The direction of the plates is the same, with channels or grooves, which may cause the center of the filter plate to sink, so that the filtrate is divided into filter cavities. After the filtrate contacts the filter cloth, the filter plate will pass through the filter cloth under the strong action of the frame filter press. After the filter cloth is filtered, the solid matter will be left, and solid-liquid separation is realized.
Plate and frame filter presses are used in the filtration of food, medicine, ceramics, chemical industry, metallurgy, oil refining, sewage treatment and other industries.
　　 When using a filter press, most of us will pay attention to what needs to be done while the filter press is running! How can I make it work better? And so on. We must not only pay attention to the working status of the filter press when it is running, but also pay attention to what needs to be done when the filter press stops working, so that it can continue to work better!

　　For the filter press equipment, after the work is completed, we must carry out a thorough cleaning. As a solid-liquid separation device, the filter press must have many pipes or filter cloth filter plates. To prevent solids from clogging the filter cloth filter plate. After closing, we must clean each part thoroughly, pour a large amount of water into the equipment, rinse the filter plate step by step, remove the filter cloth, and then clean them separately.
　　 We also need to maintain and maintain equipment. In the process of cleaning the equipment, we may wash off some lubricating oil or protective oil on the outside of the equipment. In order to prevent damage to the equipment in the next operation, we need to replace the lubricating oil and other related materials.

         Doyen specializes in providing belt press equipment for the Southeast Asian market. Welcome to visit our workshop and formulate a more scientific  plan based on the actual situation of your company. Welcome to visit joyce@doyenchina.com or visit https://www.doyenchina.com.